A Guide To Saab 9-3 Key Replacement From Beginning To End

How to Replace the Replacement Key Battery For the Saab 9-3

Saab owners have to follow a series of steps that are unique to add a second ignition key. This requires an electronic handheld computer, referred to as Tech-2 which is used by the dealer. Then a new key as well as transponder are required to be purchased and programmed to the car.

Rotate your keys to stop one from wearing out more than the next. This will also ensure that your keys remain in pristine condition.

Replacement Case

The new key fobs aren't like the older Saab keys. They feature electronic components that make them difficult to duplicate. That has made car theft a lot more difficult than it was a few years ago. However, it also has made replacing lost keys a more costly endeavor.

Saab 9-3 owners should have two working keys. It is expensive to replace a lost key as it requires replacing the CIM module, and reconfiguring the locking cylinders. Dealers usually charge between $100-$200 to do this.

There are ways to avoid the high cost. Some parts suppliers will use the code of a spare key to cut a new metal blade for a fraction of the price of the dealer. The key must be exactly the identical to the original one for it to function in your vehicle.

You can also replace the case yourself by following these steps. You'll require an open-faced screwdriver and patience. With the screwdriver, break off the plastic and then remove the emergency key. When the case is opened take out all electronic components and place them into the new case. Insert the correct key and badge inside the case.

Replacement Battery

The Saab 9-3 replacement battery is a cheap component that can be easily and quickly replaced. This YouTube video from Cyclone Cyd demonstrates how you can replace the remote fob battery with just four steps. This tutorial can be used for any modern-day saab key fob although the process might differ slightly.

The first step is to find the button that lets off the backup key in the fob. This button is usually on the back of your fob just below the Saab Logo. Next, use the flathead screwdriver to insert into the small hole of this button. This will be enough to allow you to open the fob's case so that you can replace the battery.

After the new battery CR1632 is installed You can then reassemble the remote key fob and program it to your car. The whole process should not be more than an hour. It is a very simple process that does not require any special equipment.

The process can be a bit more complicated in the event that you lose your key, but still possible. The dealer will need to determine the VIN of the car and then purchase a replacement key blade and TWICE module, both with the proper unique code. The dealer will then have to program the key using MDI, a new software tool.

Key Replacement Fob

The key fob is the part that locks and unlocks your car, it's got a battery within. The batteries have a lifespan and eventually die. This is a problem that occurs with all vehicles and the good thing is that you can change the batteries in most fobs, without replacing the whole case. Amazon sells fobs for replacement that already have all the electronics installed. You can simply remove the case and replace the batteries. You will need to remove the emergency key before you can replace the batteries. To do this, you need to insert a small screwdriver that is flat into the slot in the middle of the. The case should split when you rotate the screwdriver around it.

If you're about to replace the keys ensure that you have spare keys, because this can cut down the total cost by a significant amount. If you have spare keys, you can ask the dealer to cut the new key and program it to the car, which is much cheaper than replacing the whole key fob.

If you do not have a spare key you can add a second key to your car, however this will require a lot of research and effort. The cost of adding a second key is a few hundred dollars, and it requires programming of the car's computer. Professionals can accomplish this however it's a costly option.

Replacement Ignition

The latest SAAB 9-3 features a more sophisticated alarm system built on a keycode. If you lose your sole key, it can be expensive to add another one since the car must have a special computer added and be programmed to accept a brand new key.  he said  can charge hundreds of dollars to program the new key in the event that they are unable to complete the task.

If you've lost your only working key and a dealer is able to replace your car's computer (known as the CIM or SAAB TWICE) to make an exchange, and they will charge top dollar for it. Instead we can reprogramme the EEPROM in your current car computer to allow it to be programmed to accept a second key, and save you over 50% of what you'll pay at a dealership.

If you have owned a SAAB 9-3 many years you are aware that the ignition keys are not very durable. They can be extremely sticky and the buttons are known to fall off of them occasionally and you should think about getting a replacement if yours isn't functioning properly. Fortunately, replacing the ignition key isn't as difficult as it sounds, and it can be done in a short time with the appropriate tools.